FireShield

Why FireShield

Why homeowners choose FireShield

Everything a homeowner asks before trusting a system with their home — answered, point by point.

A FireShield controller and manifold installed on a home
A FireShield controller and hub, installed.

What you only get with FireShield

  • Fully automated, zero touch

    Set at installation, it starts on its own, even when nobody is home. The app controls are optional, never required.

  • Set for your house, not one size fits all

    Your technician sets the distance and the countdown at installation for where you live: tighter in a dense neighborhood, wider near a canyon or open brush. You can also change them in the app if you want. Others use the same fixed numbers for every house.

  • Sends water only to the side facing the fire

    Pick the zones for the next run, so water is not wasted on the safe side.

  • Stopping the system for one fire does not turn off your protection

    Stop or mute applies to that fire only. Every other fire is still watched.

  • Turns itself back on if a stopped fire comes closer

    Automatic start turns back on when that fire gets to half the distance, or one mile closer, whichever comes first.

  • Start it on a schedule

    Before a red-flag day or before you leave. If a fire arrives sooner, it starts anyway.

  • Choose foam or plain water for each run

    Save your foam for when it counts.

  • Run a quick test any time — no fire needed

    Watch every head spray, from the button or the app.

  • Live wind map over your property

    See where the wind will push the fire, next to the fire itself.

  • Weather and air quality at your house

    Not just the region — your address.

  • No water pressure in the pipes while it waits

    Nothing strains your fittings for years between runs.

  • No fan, no hard drive, no computer to crash

    A solid-state controller running firmware that does one job.

  • Any size property: 36 zones per controller

    Typical systems run 6 to 8. Add controllers for guest houses, garages, barns and acreage, all in one app.

  • Your own contractor can install it

    Or our crews.

Built better, detail by detail

  • Pump over-pressure is released automatically

    If the pressure sensor or its cable fails, a relief valve opens, sends the water back to the pool, and resets itself.

  • Air is purged from the lines automatically

    Cleaner fill and drain, less water hammer, longer-lasting plumbing.

  • An expansion tank absorbs pressure surges

    Less strain on pipes, joints and the pump.

  • Water-hammer arrestors protect every joint

    They absorb the shock each time a valve closes.

  • Fewer bends, shorter lines, copper pipe

    Less pressure lost, and copper stands up to heat and sun.

  • One Los Angeles team from design to service

    Designed, built, installed and serviced by the same local team.

  • 5-year warranty

    On every FireShield system.

Will it work when the fire comes — even if I am not home?

  • Turns on by itself when a fire gets close

    It tracks every fire around your home 24/7. No one needs to be home or awake.

  • Gives you time to cancel before it starts

    A countdown runs first. Do nothing, and it starts.

  • Ready the day it is installed

    Distance and countdown are already set for your house by the technician.

  • Keeps working when the power goes out

    Battery backup, solar optional. A standby generator can run the pump.

  • Stays online when cell towers and internet fail

    Wi-Fi, cellular and satellite. If two go down, satellite remains.

  • Can start with no connection at all

    Buttons on the controller, a remote trigger or an on-site detector.

  • Uses your pool, tank or well when street water runs out

    It switches over when street pressure is not enough.

  • Adds firefighting foam to the water

    Class A foam helps water soak in and stick to roofs, walls and plants.

Will it protect my whole property?

  • Covers roof, eaves, walls and the ground around the house

    Roof rotors, eave sprayers and perimeter heads, placed for your house.

  • Designed for your property, not a kit

    We measure your water pressure and walk your property first — free.

  • Sprinkler heads hide in the ground when off

    Pop-up rotors sit flush until they run.

What will I see and control?

  • See pressure, flow and power live on your phone

    Plus foam, pool and generator status.

  • See the fire and your activation distance on one map

    Distance is measured to the real edge of the fire.

  • Physical buttons, not just an app

    Test, test with foam, and emergency stop — right on the controller.

Who stands behind it?

  • Help is nearby in fire season

    No call center, no middleman.

  • We build all of it ourselves

    Controller, software, fire data and app — so we can fix anything.

  • No commissioned salespeople

    You talk to the people who design and install it.

  • Your system keeps getting better

    We put our earnings back into research and development.

Is it worth the money?

  • Lower priced because we keep our costs low, not because we cut corners

    Local team, in-house technology, no sales commissions.

  • Free inspection before you commit

    We measure your water pressure and walk the property.

  • A quote built for your home

    Your zones, your water source, the subscription itemized.

How FireShield is priced →

Will it help with my insurance?

  • Paperwork ready for your insurer

    Documentation you can share comes with every installation.

  • Shows your home has active fire protection

    Insurers look at how homes are protected from wildfire.

Wildfire insurance and FireShield →

The short version

Wherever you live in the U.S., you get the same system and the same team behind it.

It runs itself
Fully automated and zero touch: no decision is needed from you during a fire or an evacuation.
More zones, more control of the water
Up to 36 zones per controller, versus the 6 to 8 of a typical system.
Built for large properties
As many controllers as the property needs, all in one app, with no size limit.
Designed for your house
Distance, countdown and zone layout are set for your property, not copied from a template.
Discreet by design
Hidden inside new construction; minimal visible impact on homes already built.
Your own engineer
Every home gets a dedicated FireShield engineer and a design made for it, never a kit off the shelf.

Get Free Inspection · Estates and large properties

See what FireShield would look like on your home

The inspection is free: we measure your water pressure, walk the property and design the zones with you.

The FireShield Wildfire Defense System is designed to support wildfire mitigation, not to provide guaranteed protection. Performance varies based on environment, usage, and maintenance.