Wildfire Protection Platform
Automatic wildfire defense for your home.
An automated system that soaks your home with water and fire-blocking foam the moment wildfire approaches — so embers can’t ignite it. Backed by real-time fire data and risk scoring. Made in America, protecting homes nationwide.
Or call 1-833-NOFIRE1
What we do
Products that protect you.

Wildfire Defense System
Automatic water and foam protection, patented, that starts before embers arrive.
Learn more →
Off-Grid Pool Package
Pumps your pool water with the grid down. No generator, no inverter, no solar.
Learn more →
FireShield Intelligence
We combine every source of fire data and decide what your house needs.
Learn more →
FireShield Risk
A clear wildfire risk score for your property.
Learn more →
FireShield Respond
Region-wide protection for communities and agencies.
Learn more →Technology
The FireShield controller
Built for the conditions a wildfire brings: extreme heat, smoke, ash and lost power. The controller runs on solid-state electronics in a sealed, weather-rated enclosure, stays connected when local networks fail, and acts on the owner’s settings the moment a fire comes within range.


No moving parts
Solid-state electronics and purpose-built firmware. No fan to clog with ash, no operating system to crash or update.
Stays connected
Wi-Fi, cellular and satellite, with battery backup and optional solar. Losing the grid or the cell tower does not take it offline.
Protects the plumbing
Manifolds stay unpressurized in standby and are only pressurized when the system runs.
Local control, always
The override switch on the unit stops any activation, whether it was started by the owner, the app or automatically.
Why it works
Embers burn houses down.
Embers cannot ignite a wet house. So we soak your house before they get there.
- Embers, not the flame front
- Most homes lost to wildfire are ignited by wind-driven embers — often long before the fire itself arrives.
- They travel over a mile
- A fire you cannot see can still put burning debris on your roof.
- They land, then wait
- Embers smolder in gutters, on decks and under eaves until something catches.
- 24/7
- Always monitoring
- Seconds
- From start to water
- Off-grid
- Runs without power or mains water
- USA
- Designed & made in America
The hardware
The same hardware for every house.
One FireShield controller runs up to 36 zones, where typical systems run 6 to 8, and a large estate simply adds controllers that work together in one app. A small home and a multi-building estate use the same hardware. Only the settings change, plus any add-ons you choose (foam, more manifolds, a siren or a camera; satellite comes standard). Adding them does not mean redoing the wiring or plumbing.
Built in the United States for every state — and for the harshest weather any of them can throw at it.

FireShield at a glance
Protecting homes across the United States, from our headquarters in Los Angeles.
- Zero touch, start to finish
- Once it is installed, there is nothing for you to do. It watches every fire near you and starts by itself, day or night, home or away.
- 36 zones on one controller
- About four to six times what a typical system runs, so every side of the house gets its own water.
- One home or a whole estate
- Guest house, garage, barn, the land around them: add a controller for each, and run them all from one app.
- Out of sight
- Built into new homes during construction, and fitted to existing homes so you barely notice it is there.
- Starts at the right moment
- It reads live fire maps and satellite heat, and starts at a distance chosen for your house.
- Designed for your home, by your engineer
- A dedicated FireShield engineer lays out your system and has the details made for your house, so it fits the way you live and the way your home looks.
New: Off-Grid Pool Package
Wildfire protection that keeps pumping when the grid goes down
Utilities now shut the power off on purpose during high wind and high fire risk, for days at a time. A regular pump wired to the house stops with it. The FireShield Off-Grid Pool Package draws from your pool and runs from the FireShield Power Hub instead.
- No grid
- Runs from the FireShield Power Hub. No generator, no inverter.
- From your pool
- Makes itself ready from the pool and feeds your zones at full pressure.
- 6 to 16 hours
- Depending on your pool capacity. Whichever runs out first, water or Power Hub, sets the runtime.
Designed and manufactured by FireShield. Available exclusively from FireShield.

FireShield research
Future of Wildfire: Predictive Models
FireShield PWHA (Probabilistic Wildfire Hazard Analysis) runs an ensemble of fire-behavior simulations from every relevant source, from fuel, terrain and fire history to humidity, wind now and ahead, satellite heat and firefighting lines, and aggregates them into the probability that each spot burns in the next six hours, updated every minute. We tested it on a replay of the 2025 Palisades Fire. This is research: always follow your local fire authorities.
How we compare
How FireShield compares

You decide when it starts
FireShield: Choose how close a fire has to get and how long to wait before spraying.
The competition: Fixed at 7 miles and a 10-minute wait.

Water just one side of the house
FireShield: Pick only the zones you need, like the roof and east side, and skip the rest.
The competition: No option to pick zones is published.

Schedule it before you leave
FireShield: Set it to start on its own in a few hours or days, even after you evacuate.
The competition: No scheduled start is published.
For owners
The FireShield app
System status, live conditions and full control of the controller, from anywhere. The app and the controller always show the same state.





Engineered to work when it matters
Built to protect, even when you’re not there.
Professionally engineered and American-made — ready the moment wildfire approaches, day or night.
- Acts on its own — even when you’ve evacuated.
- Keeps running in an outage — battery and solar.
- Draws from your pool or tank if the mains fail.
- Shuts off automatically to prevent flooding.
Insurance
Protect what your insurer values.
Verified wildfire mitigation can support your coverage and standing with carriers. We give you the documentation to prove it.

Who we protect
Homes, businesses, and whole communities.
Homeowners
Automatic protection and a risk score for your home.

Commercial Buildings
Offices, retail, and facilities.

Insurers & Underwriters
Risk scoring and verified mitigation.

Government & Agencies
Community-scale monitoring and response.

Builders & Developers
Defense built into new construction.

The difference
We connect the data to the sprinklers.
Others only report the risk, or only spray water. Our patented system does both: it uses the fire data to start the sprinklers automatically.
- 01
Detect
We watch fires around the clock, near your property.
- 02
Assess
A risk score for your home, updated in real time.
- 03
Act
Starts on its own, before embers arrive.
- 04
Respond
Keeps owners informed, and lets them stop it or let it keep running.
Insights
Articles

The Whole System · 3 min
Future of Wildfire: Predictive Models
October 17, 2026

The Whole System · 4 min
Malibu Bryson Fire: Which Fire Map Would You Trust to Activate Your System?
October 16, 2026

How It Works · 6 min
Schedule Your Activation Before You Leave
September 18, 2026
Everything FireShield
